zilb all in one solar street light controller manual
Bluetooth APP specification
Description: Bluetooth lamps flash twice on each connection and twice every time they are sent successfully. For the safe operation of the system, the system grants administrators a variety of permissions, user rights are limited, users can only choose a variety of modes according to the fixed power parameters set by the administrator.
1. select the Chinese and English version. after entering this page, the customer can convert the point “EN” in the upper right corner to the English version (the default is the Chinese version).
2、Administrator login: the administrator needs a user name and password to log on to the following page (the mobile phone connected by the administrator will automatically retain the user name and password without entering the user name and password for future login):
1. search for a Bluetooth lamp connection: the ring in the upper right corner is separate, indicating that the Bluetooth lamp is not connected, click “search Bluetooth”,
At this point will search for the surrounding Bluetooth lamp name, click on the Bluetooth lamp to connect to the “not connected” place, will be connected to the lamp, the lamp will flash twice, indicating that the lamp is connected to the lamp, the lamp will flash twice every time it is connected.
Returning to the previous page, you can see that the circle in the upper right corner is connected, indicating that the phone is connected to the lamp.
2. setting parameters: click “working Mode” to appear on the following page 1, and then click “General Parameter Settings” to appear on page 2
This is where you can set all the parameters in the page, such as clicking “overcharge” will appear on the following page, scroll through the lower half to select the required parameters and click OK.Then set other parameters, after setting the click on the “send” lamp holder will flash twice, indicating that the reception was successful.
3. set the working mode: after setting “General Parameter Settings”, you can return to the next level of page. there are four working modes that can be set, one of which is timing working mode. Click “working Mode 1”, the middle page appears, click the first line of the right “human induction mode” will appear on the right page, scroll in the lower half of the selection of “human induction mode” or “boost constant current mode.”
Select and press the “confirm key”, on this page you can set the specific parameters required by the customer, such as clicking “load current”, you can scroll to select the required load current, and other parameters can be set in the same way. After all the parameters are set, click “send”, and the lamp will flash twice to prove the success of the transmission.
“working Mode 2” working Mode 3 “is set in the same way as” working Mode 1 “.
“timing mode of operation” setting (this timing mode of operation has only one working period power and time): click “timing mode” to scroll to set “load current” first period power “first period time”
4. read parameters: click “read parameters” to read the “general parameter settings” in the controller and modify the send
5. test mode: click on test mode to set the power of customer test.”load current” and “output power”
3. reset: “reset” is the default parameter set by the factory and will not be used in most cases.
5. operation information: click on the running information to read the running status of the controller. click “read status” to read the real-time number
3, display switch: click “display switch”, click “on” or “turn off the light”, you can turn on and off the light.
Controller with display screen, click “Show on key” the first time, display battery capacity, click the second time, display the battery temperature, click the third time, close the display screen. If you do not operate for a minute, automatically turn off the display.
Without a display controller, click “Show on key” to turn on or off the lights.
User login: click user login.
1. working mode: click on the working mode, the user can choose according to the administrator set up any of the three working mode to press the send key.
1．Timing mode: the user clicks “timing mode” and clicks “first period” to set the light time in the second half of the scroll, and then press “OK” and then press “send”.
2. test mode: click “test mode” and then click “output power”, you can scroll down the test power output.
3. display switch: press “display switch”, the battery capacity and battery temperature can be displayed with the display screen, and the lights can be turned on and off without the display screen.
4. operation information: users can read the battery power and temperature by clicking “run information”.
5. Bluetooth search: click “Bluetooth search” to find the Bluetooth lamp you want to connect to.